簡單實用的電動葫蘆滑觸線-蘇博滑觸線

1.電動葫蘆多安裝在U型軌道上。針對這個特點，我們把鋼索布置在軌道中間，工字鋼上部。鋼索采用椎10mm鋼絲繩或圓鋼，端部用花籃螺栓緊固。
More than 1 electric hoist mounted in U type track. According to this characteristic, we put the rope arranged in the middle of the track, the I-shaped steel is. Cable using vertebral 10mm wire rope or round end with flower basket bolt fastening.
  2.滑動環為兩圓環相扣，有一定余量，以避免鋼索刮卡。轉向環為兩圓環用螺栓相連，可自由轉動。
The 2 sliding ring to two ring phase buckle, have a certain margin, in order to avoid cable scratch card. To ring two ring is connected with bolts, free rotation.
  3.把一個轉向環一端套在鋼索上，留好電機引線后橡套線固定在轉向環下端。然后把多個滑動環一端穿到鋼索上，再把橡套線分段固定在滑動環下端。前端接電機，可自由轉動。后端接在電源上。
3 a steering ring end is sheathed on the cable, keep the lead wire of the motor after the rubber sleeve fixed on the lower end of the ring line steering. Then the multiple sliding ring side wear to the cable, then the rubber sleeve fixed on the lower end of the sliding ring line segment. The front end is connected with a motor that can rotate freely. The rear end is connected to the power.
  4.在電機的牽引下，以轉向環為中心，牽引鋼索作直線或圓周運動。
4 in the motor traction, with steering ring as the center, traction steel straight or circular motion.
  5.直軌道也可采用以上方法。
5 straight track, also can use the above method.