產品名稱（The product name）：室外落地式SMC光纜交接箱
產品型號（Product model）：RS-GXF05型（144芯288芯432芯576芯648芯720芯864芯1152芯1440芯）
產品材質（Product material）：SMC（復合材料）
產品安裝（The product installation）：室外落地式（壁掛式）
產品價格（The product price）：電儀
生產廠家（The manufacturer）：慈溪市日晟通信設備廠
（contact）：（）
箱體采用SMC模壓材料或不銹鋼鋼板的封閉結構形式。SMC箱體采用模壓結構，不銹鋼箱體采用三明治式雙層結構。本標準給出的箱體尺寸為參考尺寸。門通過鉸鏈結構連接，門可自由開合5000次不損壞。門鎖應為防盜結構，具有良好的抗破壞性，應符合中華人民共和國公共安全行業標準GA/T 73-94 機械防盜鎖規定。
（2）光纜從箱體的底座進纜孔進出。箱體留有相對獨立的進出線孔，孔洞數量應滿足滿配時的需求。
（3）96芯、144芯光纜交接箱采用單面左開門結構，288芯、576芯雙面光纜交接箱采用單面右開門操作結構；576芯單面光纜交接箱采用單面*門操作結構。576芯單面*門操作結構中，應設有水平走纖槽道，以便于水平走纖的管理和維護。
（4）光纜交接箱配有密封膩?zhàn)?，以便于線纜引入孔處的密封，防止水和嚙齒類動物進入機箱。密封膩?zhàn)討?yīng)高溫不流淌，低溫不凝固，遇到潮氣會膨脹，切實達到密封要求。
（5）箱體應保證電氣導通，并有完善的接地系統。
（6）箱體外形尺寸及容量配置如表一所示。
產品名稱 | 產品型號 RS-GXF5 | 產品規格 長*寬*高（mm） | 備注 （安裝方式） |
96芯光交箱 | RS-GXF5-96T | 750*550*310（mm） | 立式、掛壁式 |
144芯光交箱 | RS-GXF5-144T | 1050*550*310（mm） | 立式、掛壁式 |
288芯光交箱 | RS-GXF5-288T | 1450*750*320（mm） | 立式 |
360芯光交箱 | TS-GXF5-360T | 1450*750*320（mm） | 立式 |
576芯光交箱 | RS-GXF5-576T | 1450*750*540（mm） | 立式 |
720芯光交箱 | RS-GXF5-720T | 1450*750*540（mm） | 立式 |
1152芯光交箱 | RS-GXF5-1152T | 1550*1270*660（mm） | 立式 |
【專業供應：中國電信、中國移動、中國聯通、中國廣電】
機械活動部分
機械活動部分應轉動靈活、插拔適度、鎖定可靠、施工安裝和維護方便。門的開啟角應不小于120°，間隙應不大于3mm。結構應牢固，裝配具有*性和互換性，緊固件無松動。外露和操作部位的銳邊應倒圓角。
引入光纜彎曲半徑
引入光纜進入箱體時，其彎曲半徑應不小于光纜直徑的15倍。
箱體結構
箱體結構采用全正面或正反兩面操作，布放、盤繞光纖跳線的裝置要設計合理，光纖跳線設定為側走線方式，光纜引入后應有護套管保護，應有足夠大的跳纖面積。整個內部箱體應保證電氣導通，并有完善的接地系統。
箱體必須滿足滿容量布放、盤繞光纖跳線要求，滿配置時不影響維護操作。
機箱內應在合適的位置預留直熔單元，以便于光纜的直通。
光纖終接裝置、尾纖配線裝置、適配器卡座、安裝板、尾纖及適配器，在滿容量范圍內應能方便地成套配置。開剝后的散纖應加護套管（壁厚0.9mm，材料硬度為邵氏硬度Shore70）。標識應從左到右，從下到上。
保護套、襯墊及纖芯和尾纖彎曲半徑
光纖光纜穿過金屬板孔及沿結構件銳邊轉彎時，應裝保護套及襯墊。纖芯、尾纖無論處于何處彎曲，其彎曲半徑應不小于30mm。
箱體表面
SMC箱體表面的光澤和紋理應均勻美觀，且無結瘤、縮孔、起泡、針孔、開裂、剝落、粉化、顆粒、流掛、露底、夾雜臟物等缺陷，箱體表面不應出現任何緊固件。
金屬箱體表面涂覆層應表面光潔，色澤均勻、無流掛、無露底；金屬件無毛刺銹蝕。
結構裝置上的文字、圖形、符號和標志
結構裝置上的文字、圖形、符號和標志應清晰、完整、無誤。
產品規格
顏色
SMC箱體的表面顏色為PANTONE 413C，金屬箱體主體及各種金屬件的噴塑為PANTONE 413C（細砂）。
12芯熔配一體化托盤為左、右出纖可調節設計，滿足外纜的熔接、尾纖的存貯、跳纖終端等功能。本系列機架采用左出纖模式。托盤熔接盤、終端盤材料采用阻燃ABS、顏色為PANTONE 3405U，蓋板材料采用阻燃ABS、顏色為PANTONE 427U。
分路器（1/2×16）托盤結構示意圖：
每個托盤可安裝18個適配器，zui大滿足2×16分纖模式。
托盤高度25mm，為1個12芯熔配一體化托盤的高度。
分路器托盤盒體材料采用阻燃ABS、顏色為PANTONE 3405U，蓋板材料采用阻燃ABS、顏色為PANTONE 427U
（1）內部箱體主要橫梁（上）、橫梁（下）、立架（左）、立架（右）、立柱（左下）組件、立柱（右下）組件、過路板、盤纖板、安裝板I、安裝板II、安裝板III、固定腳、分光器托盤、12芯熔配一體化托盤、過路直熔盤、走線單元等組成。
（2）箱體內配結構分為跳纖區，過路直熔區和外纜進線區，中間主體部分為熔配一體化托盤及分路器托盤安裝區，材料為金屬板材的內配機架和立柱壁厚不小于1.5mm，承重部件材料厚度不少于2mm。
（3）托盤模塊可方便更換適配器，考慮到防塵和運輸?shù)纫蛩?，托盤的蓋板應能覆蓋到適配器及熔纖區。
（4）光纖存儲使用圓形繞纖輪，繞纖輪的安裝位置應統一，外徑不小于Φ60mm。局內使用的設備繞纖輪采用工程PVC材料，以有效降低成本并能滿足使用要求；局外使用的設備繞纖輪采用鋁型材。
【Day sheng communications after-sales 】
Our company according to ISO9001 quality assurance model suitable for the company's quality assurance system is established. My company's products according to product life cycle quality ring the quality of the whole process of * *. For customers to implement a full range of quality satisfaction pledge.
Below is my company's commitment to customer service, is also my company to the basic requirements of after-sales service
In order to better serve the needs of users, do a good job in guiding use timely after-sales service, we are in line with "all the pursuit of high quality, high quality, customer satisfaction" for the purpose of the spirit. With "considerate service, reliable product quality" as the principle to the user to do the following commitments:
A, product quality commitment:
1, product manufacturing and testing are conform to the national standard.
2, products tested in a professional testing personnel, to ensure that the indicators meet the requirements of your products.
3, our products are provided in the warranty period if there are quality problem, we are willing to bear all the responsibility.
Second, the delivery time commitment:
We ensure that the provided product to deliver the goods in accordance with the need to request time designated place, if you have special requirements, need to be ahead of schedule, we can negotiate with you, ensure timely meet your demand.
3, if the goods provided by the vendor when unpacking the case, found to have any problems (including appearance damage), must be able to accept to use the way to solve: timely replacement and maintenance for new products.
Fourth, in the warranty period, the same three consecutive maintenance equipment, the same quality problem still can't normal use, we promise to replace with brand new equipment, the same model, and the quality of the products implement "3 packets" service. Outside the warranty period, equipment replacement and maintenance charge of spare parts cost, not artificial technology and service charge.
Five, the after-sales service ability, and in the design of the equipment service life period, our commitment will be able to make use to replace the authentic to the original factory parts and components, to ensure the normal use of equipment. Bidder shall set forth the repairs after the warranty period charge standard, maintenance spare parts warehouse location and factory repair station locations.
Sixth, establish reasonable sales service management system and the system:
1, the pre-sale service. Set up special sales service agencies, the company will arrange related professionals responsible for the use of the present teaching correctly in a timely manner.
2, sale service. In order to prevent unnecessary loss caused by incorrect user, in the process of product use, the company will send relevant technical personnel to the base for technical guidance to the user. To ensure proper use of the product, allow the user to use safety, rest assured.
3, after-sales service. I response within 2 hours maintenance services company, arrived at the scene within 12 hours, to make better products after-sales service work, receive user feedback problems in time, the company is equipped with special yibin after-sales service ephone: (), have a professional answer and make feedback timely records, and provide the method to solve the problem. If needed to the on-site guidance, the company will arrange related personnel within 24 hours to the designated location timely guidance.
4, after-sales service declaration: our company services are provided by the service free of charge.
Seven, product after-sales plan
1, after the normal operation of equipment acceptance, the company appointed professional engineers responsible for the expensive unit at the scene to provide maintenance and operation of without being limited by the personnel training, training organization company 2 times a year. The training content includes: equipment operation right knowledge; Identify the primary fault recovery method and necessary; The common troubleshooting methods.
2, regularly send professional personnel to the owner to check the equipment running status. Using "consultation system" and "' a combination of rewards and punishments system thoroughly solve the problems.
