介電擊穿強度試驗儀
Dielectric breakdown strength tester
產品名稱：介電擊穿強度測定儀
Product name: dielectric breakdown strength tester
產品型號：BDJC-50KV
Product model: BDJC - 50 kv
控制方式：微機控制
Control mode: microcomputer control
滿足標準：GB1408-2006 絕緣材料電氣強度試驗方法
Meet the standard: GB1408 2006 insulation dielectric strength test method
GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗
GB/T1695-2005 rubber power frequency voltage breakdown strength and voltage resistance strength test
GB/T3333 電纜紙工頻電壓擊穿試驗方法
GB/T3333 cable ZhiGong frequency voltage breakdown test method
HG/T 3330絕緣漆漆膜擊穿強度測定法
HG/T 3330 insulating varnish film breakdown strength measurement
GB12656 電容器紙工頻電壓擊穿試驗方法
GB12656 ZhiGong frequency capacitor voltage breakdown test method
ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法.
ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test method.
一、適用范圍及功能
A, scope and function
主要適用于固體絕緣材料（如：塑料、橡膠、薄膜、樹脂、云母、陶瓷、玻璃、絕緣漆等介質）在工頻電壓或直流電壓下?lián)舸姸群湍碗妷旱臏y試。
Mainly applied to solid insulating material （such as plastic, rubber, thin film, resin, mica, ceramic, glass, insulating paint, etc.） under power frequency voltage or dc voltage breakdown strength and withstand voltage test.
本儀器由電腦控制，通過我公司自主研發的全新智能數字集成電路系統與軟件控制系統兩部分來完成，使升壓速率真正做到勻速、準確，并能夠準確測出漏電電流的數據。可實時繪制試驗曲線，顯示試驗數據，判斷準確，并可保存，分析，打印試驗數據。
The instrument is controlled by computer, through my company independent research and development of new inligent digital integrated circuit system and the software two parts to complete the control system, make the pressure rise rate really uniform and accurate, and can accuray measure the data of leakage current. Can be real-time rendering test curve, according to the test data, accurate, and can save, analysis, print the test data.
自主知識產權（國內*，）
Independent inlectual property rights （the first domestic, international lead）
二、技術要求：
Second, the technical requirements:
01、輸入電壓： 交流 220 V
01, input voltage, ac 220 V
02、輸出電壓： 交流 0--100 KV ;
02, output voltage: communication 0-100 KV;
直流 0—100 KV
Dc 0-100 KV
03、電器容量： 5KVA
03, electric capacity: 5 kva
04、高壓分級： 0-10KV，0--50KV，0-100KV
04, high-pressure sizing: 0 to 10 kv, 0, 50 kv, 0-100 kv
05、升壓速率： 100V/S 200V/S 500 V/S 1000 V/S 2000V/S 5000V/S 等
05, pressure rise rate: 100 V/S/S/S 1000 V, 500 V, 200 V / 2000 V / 5000 V/S S S, etc
（備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）
（note: meet the standard requirements and can be set according to user requirements different pressure rise rate）
06、試驗方式：
06, test mode:
直流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
Dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test
交流試驗：1、勻速升壓 2、梯度升壓 3、耐壓試驗
Ac test: 1, 2, gradient booster 3 uniform booster, withstand voltage test
07、試驗介質：空氣，試驗油
07, test medium: air, test oil
08、安裝靈敏度較高的過電流保護裝置保證試樣擊穿時在0.05S內切斷電源。
08, installation high sensitivity of overcurrent protection device to ensure the sample breakdown when cut off the power supply within 0.05 S.
09、采用智能集成電路進行勻速升壓。
09, inligent integrated circuit is adopted to improve the pressure at a constant speed.
10、支持短時間內短路試驗要求。
10 short circuit test requirements, support for a short time.
11、電壓試驗精度： ≤ 1％。
11, voltage test accuracy: 1% or less.
12、試驗電壓連續可調： 0--100 KV。
12, test voltage adjustable: 0-100 KV.
13、電流可采集到m*。
13, current can be collected to mA.
14、出具*計量單位的校準檢定證書或出具客戶計量單位的證書。
14 issued by national level units of measurement and calibration verification certificate, or issue the certificate of customers specify the units of measurement.
三、安全保護
3, safety protection
本試驗儀器電路保護控制：
This test instrument circuit protection control:
（1）超壓保護 （2）過流保護 （3）短路保護（4）漏電保護 （5）軟件誤操作保護
（1） the overpressure protection over-current protection （2） （3） short circuit protection （4） leakage protection misoperation （5） software protection
高壓輸入回路斷電保護控制：
High voltage power input circuit protection control:
（1）總電源開關 （2）調壓器復位開關 （3）高壓斷電開關
（1） the total power switch （2） voltage regulator reset switch （3） the high voltage power switch
（4）試驗箱門安全開關 （5）高壓回路開關 （6）漏電保護開關
（4） test the door safety switch （5） high pressure circuit switch （6） leakage protection switch
試驗在試驗箱中進行，試驗箱門打開時電源加不到高壓變壓器輸入端，即高壓側無電壓。100KV測試設備高壓電極距離試驗箱壁的zui近距離大于370mm，50KV測試設備高壓電極距離試驗箱壁的zui近距離大于250mm，試驗時即使人接觸箱壁也不會有危險。 設備要安裝單獨的保護地線。接保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。 該試驗設備的電路設有多項保護措施，主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。直流試驗放電報警功能:在設備做完直流試驗時,當開啟試驗門時設備會自動報警,直至使用設備上的放電裝置放電后報警會自動取消.（注：因為直流試驗后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造成人身傷害）。 試驗放電裝置，隨主機為一體化，改進了以往單獨配備一根放電桿的功能。 六級高壓安全斷電控制：①總電源開關②高壓斷電開關（鑰匙開關）③調壓器復位開關④試驗箱門安全開關⑤高壓變壓器輸入側限流空開⑥漏電保護開關
Test in the test chamber, high voltage transformer when the door is opened the power test is less than input, namely high side no voltage. 100 kv high voltage electrode distance test equipment test chamber wall of recent distance is greater than 370 mm, 50 kv testing equipment of high voltage electrode distance test chamber wall recent distance is greater than 250 mm, even when testing people touch the walls of the danger. The protection of the equipment to install a separate ground wire. Protection earthed, main is to reduce the sample breakdown of strong electromagnetic interference on around. Also can avoid the control computer is out of control. The circuit is equipped with multiple protection measures of the test equipment, mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc test discharge alarm, etc. Dc discharge test alarm function: when the dc test equipment to finish, when open the test device will automatically alarm, to use equipment alarm will be automatically cancelled after discharge of the discharge devices. （note: because dc test after discharge will be dangerous to personal safety, can not directly take electrode, a reminder using personnel discharge so as not to cause personal injury）. Discharge test device, with the integration to the host, with separate improved on previous one pole of function. Six levels of high voltage power security control: （1） the total power switch （2） high voltage power switch, key switch） （3） voltage regulator reset switch （4） test the door safety switch （5） high voltage transformer input side current limit open 6 leakage protection switch
四、設備主要配置
Four main configuration, equipment
設備標準配置
Equipment standard configuration
序號 名稱 配置 備注
Serial number name of the configuration notes
01 試驗主機 一臺
01 a test hosts
02 控制裝置 一套
02 a control device
03 試驗電極 二套（國標1408.1）
03 2 sets test electrode （1408.1 gb）
04 試驗油箱 二只
04 test two tank
05 放電系統 一套
A set of 5 discharge system
06 控制系統 一套
6 a set of control system
07 數據采集系統 一套
7 a set of data acquisition system
08 試驗軟件 一套 光盤
Test software is a set of CD
09 計算機 一套 品牌
09 computer a brand
10 噴墨打印機 一臺 品牌
10 a brand inkjet printer
11 產品使用說明書 一份
A 11 product instruction for use
12 計量證書 一份
12 a measurement certificate
13 產品合格證 一份
A 13 product certificate
五、此設備常規型號為：
Five, the conventional model is as follows:
BDJC-10KV
BDJC - 10 kv
BDJC-20KV
BDJC - 20 kv
BDJC-30KV
BDJC - 30 kv
BDJC-50KV
BDJC - 50 kv
BDJC-100KV
BDJC - 100 kv
