凝膠時間測定儀（垂直運動）：
適用于：適用：樹脂、玻璃鋼、復合材料、彈性體、硅化工、膠粘劑、密封膠等領域凝膠時間的測定
遵照BS 5350 B5; BS 3532 K; BS 3815 K; BS 5617; BS 2782-8測試規范
技術參數：
| Technical Data | ||
| 外尺寸: | 4.7 (119) x 2.7 (69) x 3.7 (94) | |
| 活塞長度: | 10.6 (269) | |
| 支架: | 5.2 (132) long x 0.5 (13) diameter | |
| 計時器: | GT-5: | 9999 minutes in 1 .0 min. increments |
| GT-6: | 999.9 minutes in 0.1 min. increments | |
| 垂直幅度: | 0.5 (13) | |
| 凝膠時間準確性: | ± 2% | |
| 電壓: | 220V | |
凝膠時間測定儀（垂直運動）主要特點：
自動偵別凝膠化發生，提高測試重復性，避免人為誤差
電子計時器自動記錄凝膠時間，方便無人值守
聲（峰鳴聲）光（指示燈）提示凝膠化發生
活塞拆卸簡單，方便清洗，更可選擇一次性玻璃活塞和樣品杯，提高測試效率
所有活塞經過精密的重量修飾和同心度、錐度保證
出廠嚴格校正并隨附可供追溯的NIST證書
GT-5凝膠時間分度為1min,GT-6凝膠時間分度為0.1min
依據測試標準提供三種直徑的不銹鋼活塞供選擇，分別是：22mm,19mm,16mm
一次性玻璃活塞可供選擇，包裝規格：100pcs
樣品杯兩種包裝規格可供選擇：12pcs和240pcs
兩種樣品溫控方式可供選擇：恒溫電熱塊、恒溫水浴/油浴
訂貨信息：
| 型 號 | 簡 單 描 述 | |
| GT-5 | FTG5 Gelation Timer,220V | |
| GT-6 | FTG6 Gelation Timer,220V | |
| Calibration Certification to NIST | ||
| Sample Cups | ||
| GT-6027846 | Cups, 12 | |
| Stainless Steel Plungers | ||
| Three sizes of stainless steel plungers are available and can be ordered separately as follows: | ||
| GT-6020985 | Plunger, 7/8" (22mm) diameter | |
| GT-6020979 | Plunger, 3/4" (19mm) diameter | |
| GT-6020982 | Plunger, 5/8" (16mm) diameter | |
| Glass Plungers | ||
| GT-6021794 | Plungers, Glass 100/package | |
| Heaters | ||
| HP-10107 | Dry Block Heater | |
| HP-10187 | Fitted Block for above | |
| LA-290509 | Retort Stａnd w/clamp | |
注：對于類產品，請先查證核實企業經營資質和產品注冊證情況
