產品型號：110.02-O2K
對拷型遙控器操作說明書
本遙控器是免拷貝機拷貝各種汽車，電門等防盜遙控器，具有拷貝和發射于一體，適合拷貝各種固定碼遙控器。可學IC型號有：AX5326-3、PT2262、PT2260、EV1527、FP527、PT2242、HT600、HT680、HT6207、HT6010、HT6012、HT6014、AX5326-4、SMC918、PT2240、HT6013、HT6013、HT12D等遙控器，操作簡單，方便快捷，子機可重復使用。
清碼:同時按住關鎖和解鎖,2S后LED燈一閃即滅,然后關鎖鍵保持不動,松開解鎖鍵連續按三次（須在3秒內完成此動作）接下來就快速的閃爍,這表明碼已經清除了。
拷貝：左手拿原始遙控，右手拿我們的自拷遙控器，兩只遙控盡量靠近（背靠背學習較果更佳），同時按下兩只遙控的上鎖鍵，3S后，LED燈會閃爍3下，接下來就快速地閃爍，這表明原始遙控的上鎖鍵的碼已經被我們的自拷遙控器學進去了，其它3個按鍵也是同樣的操作。
恢復：當您不小心清除了自拷遙控器的碼，您可以同時按下*和鈴鐺鍵，3S后，LED燈會閃爍3下，接下來就開始快速點閃爍，這表明自拷遙控器的碼被復原了
調頻：如果是固定頻率型請直接按動遙控器試驗，如是可調頻率的，如是315MHz，測也可以直接試驗，如不是此頻率，請用無感調棒調節到所要的頻率，可調頻率從280MHz—490MHz無級可調，有五金裝飾的遙控器請調低3MHz左右以消除五金對頻率的影響，如315MHz可以調到312MHz，433MHz可以調到431MHz，這樣裝上有五金的外殼后頻率就會上揚一點到315MHz或433MHz。
02-O2K Universal Wireless RF Remote Control Duplicator Frequency Adjustable
Features:
- Universal remote control duplicator can easily copy code from other RF remote control without copying device and control the same original receiver.
- Copy the code one by one, saving the copy memory of each button separay.
- Repeatedly copy code from other RF remote control for million times.
- High quality RF remote with chrome metal frame and 4 chrome buttons.
Application:
- Home/store anit-theft alarm, E-bikes /motorcycles/car alarms, all kinds of door/window controllers, LED and other industrial control
How to use:
- Before starting to copy the code, you need to know the function of each button
- 1. Code Clear
It’s necessary to clear the original codes of the copy code remote control. Press and hold the“arming”button and“disarming”button simutaneously for 2 seconds till the LED indicator flashes 3 times. Keep pressing the“arming”button and release the“disarming”button, then press the“disarming”button for 3 times within 5 seconds. The LED indicator slowly flashes 3 times then becomes fast flash to indicate the code clear is finished
- 2. Code Copy
With the original remote control on your one hand, with the copy code remote control on the other hand, approach the two remote controls to each other as close as possible. Press and hold the button to be learned on the original remote control and the button you want to learn on the copy code remote control simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the code is learned/copied successfully. Repeat the above steps to copy the code of other buttons
- 3. Code Retrive
In case if you lost the codes you are using by accident, don’t worry you can retrive them by following the step below: press and hold the“starting”button and“muting”button simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the codes are retrived now.
- 4. Frequency Adjustment
For fixed frequency copy, you can directly copy the code from other RF remote control. If not, if need to open the cover of the copy remote control and adjust the frequency with the great sense to meet the frequency of original remote control. For example, the frequency of the copy remote is 315MHz, but the original remote is 433MHz, you need to adjust the frequency of the copy remote from 315MHz to 433MHz.
The adjustable frequency range is 280MHz to 490MHz.
會員1.png)
