產品型號有：
VT125D
VT125S12
VT125S11
VT125S10
VT125S09
VT125S08

V-TORK VT125D氣動執行器是以壓縮空氣為動力,通過活塞齒條的直線運動帶動輸出軸的齒輪傳動，以轉角行程輸出的氣動執行器。有雙作用及單作用型，廣泛適用于球閥、蝶閥、旋塞閥等角行程閥門的開關和調節，也可適用于其他回轉場合，是實現工業管道自動化控制的理想裝置。
V-TORK VT125D氣動執行器執行執行機構配有雙向齒輪軸行程限位裝置。位于殼體側面的行程限位裝置允許氣動執行機構行程在85°和95°之間作±5°的調整。設計這2個行程限位裝置同時是為了抵抗氣動執行機構的最大額定扭矩和吸收由推薦行程速度所帶來的最大沖擊載荷松開鎖定螺母，可進行逆時針和順時針的限位螺釘旋轉，分別轉動左邊的限位螺釘和右邊的限位螺釘可減小或增加行程角度，最后旋緊鎖定螺母。

The V-TORK VT125D pneumatic actuator actuator is equipped with a bidirectional gear shaft travel limit device. A travel stop on the side of the housing allows ±5° adjustment of the pneumatic actuator travel between 85° and 95°. These 2 travel stops are designed to both resist the maximum torque rating of the pneumatic actuator and absorb the maximum shock load caused by the recommended travel speed. Loosen the lock nut for counterclockwise and clockwise limit screw rotation, respectively. Turn the left limit screw and the right limit screw to decrease or increase the travel angle, and finally tighten the lock nut.