VT075D氣動執行器適用于旋轉閥門的雙活塞齒輪齒條式結構，輸出扭矩穩定缸體材質為鋁合金或不銹鋼。底部軸裝配孔符合ISO5211標準，氣源孔、輸出軸的頂部和頂部的安裝孔符合 NAMUR 標準，相同規格有雙作用式、單作用式(彈簧復位)，可根據閥門需要選擇方向，順時針或逆時針旋轉。根據用戶需要安裝電磁閥、定位器、限位開關及手動操作裝置。 

接口標準

執行器和閥門的接口符合 ISO5211, DIN3337

執行器和控制閥（電磁閥等）的接口符合 NAMUR

執行器和信號單元（限位開關，定位器）的接口符合 NAMUR

行程范圍及開-關位角度調節

標準行程：0°±5°～ 90°±5°（兩個獨立的外部調節螺栓可滿足在0°和90°同時實現±5°的調節范圍。）

Type ISO Flange Square CH Shaft Depth Data Sheet

VT050D/S

VT065D/S

VT075D/S

VT085D/S

VT095D/S

VT110D/S

VT125D/S

VT140D/S

VT160D/S

VT190D/S

VT210D/S

VT240D/S

VT270D/S

VT300D/S

VT075D/S是以壓縮空氣為動力,通過活塞齒條的直線運動帶動輸出軸的齒輪傳動，以轉角行程輸出的氣動執行器。有雙作用及單作用型，廣泛適用于球閥、蝶閥、旋塞閥等角行程閥門的開關和調節，也可適用于其他回轉場合，是實現工業管道自動化控制的理想裝置。VT075D/S is a pneumatic actuator which is powered by compressed air, drives the gear transmission of the output shaft through the linear motion of the piston rack, and outputs by angular stroke. There are double-acting and single-acting types, which are widely used in the switching and adjustment of angular stroke valves such as ball valves, butterfly valves, and plug valves, as well as other rotary occasions. It is an ideal device for realizing automatic control of industrial pipelines.