XSTOU DFS160-SR06-M, DFS160-SR07-M, DFS160-SR08-M, DFS160-SR09-M, DFS160-SR10-M pneumatic actuator uses pneumatic pressure to drive the actuator to open and close or adjust the valve, also known as pneumatic actuator Mechanism or pneumatic device, but commonly known as pneumatic head. Sometimes it is also equipped with certain auxiliary devices. Commonly used are valve positioners and handwheel mechanisms. The function of the valve positioner is to use the feedback principle to improve the performance of the actuator, so that the actuator can achieve accurate positioning according to the control signal of the controller.XSTOU DFS160-SR06-M、DFS160-SR07-M、DFS160-SR08-M、DFS160-SR09-M，DFS160-SR10-M氣動執行器用氣壓力驅動啟閉或調節閥門的執行裝置，又被稱氣動執行機構或氣動裝置，不過一般通俗的稱之為氣動頭。有時還配備一定的輔助裝置。常用的有閥門定位器和手輪機構。閥門定位器的作用是利用反饋原理來改善執行器的性能,使執行器能按控制器的控制信號,實現準確的定位。

XSTOU DFS160-SR09-M氣動執行器接口標準：

執行器和閥門的接口符合 ISO5211, DIN3337

執行器和控制閥（電磁閥等）的接口符合 NAMUR

執行器和信號單元（限位開關，定位器）的接口符合 NAMUR

行程范圍及開-關位角度調節

標準行程：0°±5°～ 90°±5°（兩個獨立的外部調節螺栓可滿足在0°和90°同時實現±5°的調節范圍。）

大行程：0°±5°～ 180°±5°（也可以選擇 100°,110°, 120°, 130°, 140°, 150°, 160° 或 170°）

三位式：0°±5°-中間位置- 90°±5°； 0°±5°-中間位置- 180°±5°

規格有以下：DA雙作用  SR單作用

DFS125-SR05/6/7/8/9/10/12-M

DFS145-SR05/6/7/8/9/10/12-M

DFS160-SR05/6/7/8/9/10/12-M

DFS180-SR05/6/7/8/9/10/12-M

DFS200-SR05/6/7/8/9/10/12-M

DFS240-SR05/6/7/8/9/10/12-M

DFS265-SR05/6/7/8/9/10/12-M

DFS300-SR05/6/7/8/9/10/12-M

DFS350-SR05/6/7/8/9/10/12-M

DFS400-SR05/6/7/8/9/10/12-M