通信電纜 網絡設備 無線通信 云計算|大數據 顯示設備 存儲設備 網絡輔助設備 信號傳輸處理 多媒體設備 廣播系統 智慧城市管理系統 其它智慧基建產品
西朗門業（蘇州）有限公司
西朗門業（蘇州）有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地衢州市
聯系方式：石甜甜查看聯系方式
更新時間：2017-09-19 15:07:40瀏覽次數：515次
聯系我時，請告知來自 智慧城市網衢州做軟質快速門、快速卷簾門的廠家，衢州軟質快速門，快速卷簾門廠家，衢州快速卷簾門廠家，衢州軟質快速卷簾門，衢州軟質快速門，快速卷簾門廠家，衢州快速卷簾門廠家，衢州軟質快速卷簾門，衢州軟質快速門，快速卷簾門廠家，衢州快速卷簾門廠家，衢州軟質快速卷簾門
品牌：西朗SERANG
西朗主營產品：快速卷簾門，柔性快速卷簾門，工業提升門，車庫門，門封，平臺。
衢州做軟質快速門、快速卷簾門的廠家
1、將門扇豎起于洞口中各部位調整至要求尺寸，門扇保持垂直。
1,the door leaf from each part of the vertical adjusting to the required size, the door to keep vertical.
2、將上下門軸初步點焊于洞口預埋件及門扇邊梃上，裝配時應保證上下門軸在同一垂線上，否則門扇開關阻力大易損壞門軸，初步點焊后在保證門扇不會傾覆的情況下，試手動開關門扇，應能靈活轉動無阻滯，再將門軸焊牢。
2,the upper and lower shaft preliminary spot on the embedded part and door window stile, the assembly should be guaranteed under the door in the same vertical line, otherwise the door switch resistance is easy to damage the door, the door leaf after preliminary spot will not overturn the case, try to manually switch the door should be flexible rotation, no block, then the door firmly.
3、將電動開門機安裝到位，開門機連桿與門扇聯結好。將電插銷安裝于門扇邊梃上，調整至開關門扇后能將門扇鎖住為好。
3,the electric door machine installed, open the door machine connecting rod and connecting good door. The electrical plug for door stile, adjusted to switch the door after door lock can be good.
4、按門型尺寸要求，將門扇中縫及四周密封膠條調整好，作到門扇關閉時縫隙能被膠條封嚴。
4,according to the gate type size requirements, the door leaf raphe and around the sealant to adjust, so when the door leaf is closed the gap to be rubber seal.
5、電氣控制箱裝于室內便于檢修之處。開門機和電插銷安裝應符合電氣安裝規程要求，妥善接好保護地線確保設備及人身安全。
5,an electric control box is arranged in the interior and is convenient for the maintenance. Open the door machine and electric bolt installation should meet the electrical installation requirements, to properly connect the ground protection to ensure the safety of personnel and equipment.
6、檢驗各有關部分符合要求之后，接通電源按動控制按鈕，反復調整行程開關，作到門扇到位后能停止運行。
After 6,inspection departments to meet the requirements of power supply is switched on, press the control button, repeatedly adjust the stroke switch, so the door in place to stop running.
1.ppg涂料（蘇州）有限公司
2.杜邦（中國）集團有限公司
3.中國*有限公司
4.舍弗勒（中國）有限公司
5.中國海運集裝箱（集團）股份有限公司
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智慧城市網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
