產品標題:  DS200IMCPG1A驅動器模擬 I/O 板

型號： DS200IMCPG1A

品牌： GE

                                                                              產品詳情資料：

該誤差直接取決于跳線所用導線的長度和規格，以及不良連接導致的任何誤差。對于10以外的RTD類型? 銅，跳線引入的誤差可以忽略不計。這種RTD接線技術降低了接線***，但注意以下缺點：1。由于導線和連接電阻，溫度讀數會有誤差。不建議在10? 銅RTD。2.如果通向469或任何跳線的RTD回路斷開，則斷開點的所有RTD讀數將為開路。3.如果補償導線或任何跳線斷開，斷開點的所有RTD將在沒有任何導線補償?shù)那闆r下工作。

                         產品英文詳情資料：

This error is directly dependent on the length and gauge of the wire used for the jumpers and any error introduced by a poor connection. For RTD types other than 10 ? Copper, the error introduced by the jumpers is negligible. This RTD wiring technique reduces the cost of wiring, however, the following disadvantages must be noted: 1. There will be an error in temperature readings due to lead and connection resistances. This technique is NOT recommended for 10 ? Copper RTDs. 2. If the RTD Return lead to the 469 or any of the jumpers break, all RTDs from the point of the break will read open. 3. If the Compensation lead or any of the jumpers break, all RTDs from the point of the break will function without any lead compensation.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。