產品標題: 本特利3500通訊模塊 前卡+后卡 3500/92-02-01-00

型號： 3500/92-02-01-00

品牌： 本特利

詳情資料

本特利模塊3500/92-02-01-00(前板136180-01) (后板133323-01) 

3500框架還有一種 迷你型(寬度是12" 而不是19")*；但它 只提供7個插槽，而 不是14個。與全尺寸框架一樣，它的*左端插槽為電 源和框架接口模塊預留。迷你型框架可以采用面板安 裝或通過可選的連接板安裝于19"EIA 導軌中，它不
能采用壁板安裝形式。

電源
3500/15有交流和直流兩種形式，與各地電壓源兼容。它采用行噪聲濾波做為標準形式?？蚣苤锌墒褂?nbsp;單電源或當電源不允許中斷時使用冗余雙電源。它們 分別位于框架*左端插槽的上部和下部。冗余電源可 以采用不同的電壓源供電，如主電源由120Vac電源供電，而備份電源由不間斷24Vdc電源供電。

每個電源可以單獨為整個框架及其模塊供電。當采用 冗余電源形式時，一個作為框 架的主電源，另外一個作為備 份，當主電源發生故障時，備 份電源立即自動形使主電源模 塊功能，避免框架運行發生中斷。
3500/15電源模塊具有自檢功 能，可以監測是否所有的輸出 電壓符合規范，并通過電源模 塊*板上的綠色“Supply OK"發光二極管（LED）顯示出來。

框架接口模塊
框架接口模塊 (RIM) 是3500框架與組態、顯示和狀 態監測軟件連接的主要接口。每個框架要求有一個 RIM，安裝在與電源模塊緊鄰的框架插槽中。RIM支持 專有協議，該協議使用3500組態軟件1對框架進行組 態，并提取框架數據和狀態信息用于3500操作者顯示 軟件。當Bently Nevada狀態監測軟件與3500系統配合 使用時，RIM還通過我們專有的數據管理者® 協議連接 到相應的外部通訊處理器，如TDXnet™、TDIX或DDIX
等。RIM位于緊鄰電源的框架插槽中。RIM中包含系統OK繼電器2 ，由RIM自身以及框架中其它模塊的NOT OK狀態觸發。

英文資料

Bentley Module 3500/92-02-01-00 (Front Plate 136180-01) (Rear Plate 133323-01)

There is also a mini version of the 3500 frame (with a width of 12 "instead of 19") *; But it only provides 7 slots, not 14. Like the full size frame, its left slot is reserved for the power supply and frame interface module. The mini frame can be installed in a panel or through an optional connection board in a 19 "EIA rail, and it does not

Can be installed in the form of wall panels.

source

The 3500/15 comes in two forms: AC and DC, and is compatible with voltage sources around the world. It adopts row noise filtering as the standard form. Single power supply or redundant dual power supply can be used in the framework when power interruption is not allowed. They are located in the upper and lower parts of the left slot of the frame *. Redundant power supplies can be powered by different voltage sources, such as the main power supply being powered by a 120Vac power supply, and the backup power supply being powered by an uninterrupted 24Vdc power supply.

Each power supply can independently power the entire framework and its modules. When using a redundant power supply form, one serves as the main power supply for the framework and the other serves as a backup. When the main power supply fails, the backup power supply immediately automatically activates the main power module function to avoid interruption of the framework's operation.

The 3500/15 power module has a self check function that can monitor whether all output voltages meet specifications and display them through the green "Supply OK" LED on the power module * board.

Framework interface module

The Rack Interface Module (RIM) is the main interface between the 3500 rack and configuration, display, and status monitoring software. Each frame requires an RIM to be installed in the frame slot adjacent to the power module. RIM supports proprietary protocols that use 3500 Configuration Software 1 to configure the framework and extract framework data and status information for use in the 3500 operator display software. When Bently Nevada condition monitoring software is used in conjunction with the 3500 system, RIM also uses our proprietary data manager ® Protocol connection to the corresponding external communication processor, such as TDXnet ™、 TDIX or DDIX

Etc. The RIM must be located in the rack slot adjacent to the power supply. The RIM contains system OK relay 2, which is triggered by the NOT OK status of the RIM itself and other modules in the framework.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。