產品標題: 本特利3500框架接口模塊前卡+后卡3500/22-01-01-00

型號：3500/22-01-01-00

品牌： 本特利

詳情資料

本特利內華達 3500/22M 數據接口模塊

Bently Nevada 3500/22M 數據接口模塊是 3500 監控系統和兼容軟件（系統 1* 狀態監控和診斷軟件以及 3500 系統配置軟件）之間的接口。TDI 結合了 3500/20 機架接口模塊 (RIM) 的功能和通信處理器（如 TDXnet）的數據收集功能

TDI 位于與 3500 機架的電源相鄰的插槽中。它與 M 系列監視器（3500/40M、3500/42M 等）連接，以連續收集穩態和瞬態動態（波形）數據，并通過以太網鏈路將此數據傳遞給主機軟件。有關詳細信息，請參閱本文檔末尾的兼容性部分

靜態數據捕獲能力是 TDI 的標準配置。然而，使用可選的通道啟用磁盤將允許 TDI 捕獲動態和高分辨率瞬態數據。TDI 在 3500 機架中集成了通信處理器功能

雖然 TDI 提供了整個機架共有的某些功能，但它不是關鍵監控路徑的一部分，并且不會影響用于自動機械保護的整體監控系統的正確、正常運行。每個 3500 機架需要一個 TDI 或 RIM，它們始終占用插槽 1（電源旁邊）

特征

10.5 瓦功耗

USB-B 前面板

10Base-T 或 100Base-TX 以太網，自適應

100Base-FX 光纖以太網

機架復位按鈕

報警前和報警后數據

LED指示燈

I/O 模塊繼電器

英文資料

Bentley Nevada 3500/22M Data Interface Module

The Bently Nevada 3500/22M Data Interface Module is an interface between the 3500 Monitoring System and compatible software (System 1 * Status Monitoring and Diagnostic Software and 3500 System Configuration Software). TDI combines the functions of the 3500/20 Rack Interface Module (RIM) with the data collection capabilities of communication processors such as TDXnet

The TDI is located in a slot adjacent to the power supply of the 3500 rack. It is connected to M-series monitors (3500/40M, 3500/42M, etc.) to continuously collect steady-state and transient dynamic (waveform) data, and transmit this data to the host software through an Ethernet link. For detailed information, please refer to the compatibility section at the end of this document

Static data capture capability is a standard configuration of TDI. However, using optional channel enabled disks will allow TDI to capture dynamic and high-resolution transient data. TDI integrates communication processor functionality in the 3500 rack

Although TDI provides certain functions common to the entire rack, it is not a part of the critical monitoring path and will not affect the correct and normal operation of the overall monitoring system used for automatic machinery protection. Each 3500 rack requires one TDI or RIM, which always occupies slot 1 (next to the power supply)

feature

10.5 watt power consumption

USB-B front panel

10Base-T or 100Base-TX Ethernet, adaptive

100Base-FX fiber optic Ethernet

Rack reset button

Pre alarm and post alarm data

LED indicator light

I/O module relay

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。