您好, 歡迎來到智慧城市網! 登錄| 免費注冊| 產品展廳| 收藏商鋪|
解析電纜中產生噪音的原因有哪些?
1、介質本身內部分子摩擦;
1, the medium itself molecular friction;
2、電纜電容的改變;
2, the cable capacitance change;
3、電纜介質的壓電效應;
Piezoelectric effect 3, cable dielectric;
4、電纜中導體和介質摩擦產生電荷,即當導體和絕緣之間接觸破壞時產生電荷的分離。
The charge generating conductor and dielectric friction 4, cable, separation when the conductor and insulation between the contact damage produce charge.
在聚乙烯絕緣表面擠上一層薄薄半導電(厚度0.20-0.30mm)的低噪音電纜得到了迅速的發展,其噪音值在2-3mV,對于工作在400度的低噪音電纜,可采用耐高溫半導電纖維繞包的辦法來解決,其噪音可達5mV。
In the polyethylene insulation surface squeeze on a thin layer of semi conductive (thickness 0.20-0.30mm) low noise cable obtained the rapid development, the noise value in 2-3mV, for the work in the 400 degree low noise cable, can use high temperature resistant semi conductive fiber winding package solution, the noise of up to 5mV.
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,智慧城市網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。