Connect to Divers through Industrial Modbus Networks
The Diver-MOD is a Modbus interface for Divers and is conform to the Modbus Application Protocol Specification V1.1b3. This module enables to interface Divers in a RS485 network using the Modbus/RTU protocol (Modbus TCP/IP is not supported).
Features
The Diver-MOD has a built-in pressure and temperature sensor for measuring air temperature and atmospheric pressure readings.
Read Diver memory.
Program the Diver sample interval.
Start and stop Diver.
Power is supplied by the Modbus network.
Benefits
No need for additional sensors to measure air temperature and atmospheric pressure.
No need for post-processing the pressure data.
No internal battery is required.
Applications
SCADA Modbus/RS485 networks
Real-time monitoring of municipal water supplies
Monitoring water quality and quantity at mine sites
Monitoring water level and salinity of reclaimed water
